leafloat Kitchen Sink Bottom Grid 14.09″ x 15.59″, 2 pcs, Fits Standard 32″ x 18″ Double Bowls Sink, T304 Stianless Steel, Sink Protectors
leafloat Kitchen Sink Bottom Grid
14.09″ x 15.59″, 2 pcs, Fits Standard 32″ x 18″ Double Bowls Sink
The leafloat standard kitchen sink bottom grid assembly is suitable for most standard kitchen sink (Standard 32″ x 18″Double Bowl Sink). During the cleaning process, it is possible to avoid collisions caused by direct contact with the bottom of the sink, which has a certain protective effect. Even if you have cleaned it, just put the bowl on the other side or leave the other sink empty, which can completely replace the drain rack.
- Universal Size
- T304 Stainless Steel
Rear Drain Sink Grid for Single Sink Bowl
It can be specially vacated for the drain of the sink, and it will not affect your daily use.The grid opening position is at the rear drain position, which is in line with the design of most home kitchen sink opening positions.
Easy to Clean
The gap of the grid can block some large food wastes, such as: vegetable leaves, vegetable roots, etc. This will also save you time and effort for cleaning, just pick up and pour it down, and then rinse with water.
The grid shape of this layer is overhead, the height is about 1cm from the bottom, some edges and bracket parts, there will be black rubber rings for anti-skid.
T304 Stainless Steel
All kitchen sink bottom grids are made of stainless steel material, which is corrosion-resistant and durable.
Emil Gobersneke –
Love the look of this thing in the sink. Makes a huge difference in keeping the sink clean and tidy. It will surely outlast my sink, and probably me as well. The bottom legs are sturdy and secure. I would gladly have rated it five stars but along with almost everyone else who reviewed it I had a problem with the little black side bumpers falling off and, because they are little and black, going down the disposal undetected. Looking at the quality and attractiveness of their other products I cannot imagine why they haven’t fixed this problem yet. The issue is that the bumpers are just short pieces of slit rubber tubing that are pushed on to the edge rod. They are not stiff enough to stay put with routine use and without them the drain is ten times as noisy. Looks like a better material or design is needed. As a minimum they should be available on the Leafloat company website as replacement parts. Even better, fix the problem and mail all of us some new ones.
Very practical, size was accurate. Has little rubber stops on side to help keep it from scratching the side of the sink but they fall off easily. With that said I took them off. Does a great job and side benefit I was not expecting is the sink drains better when the pots are raised up. It is an extra thing to clean though, would buy again if needed, although it¡¯s well made and I don¡¯t expect I will need to anytime soon.
So glad we finally have a sturdy perfectly sized rack for our stainless sink. The hole for garbage disposal is exactly where we needed it. I can see the rubber pieces will need to be removed when I take it out for cleaning. Not a big deal.
Cody Switzer –
Works well, and the finish doesn¡¯t seem to be changing over time. The only complaint I have is that the bumpers come off of the grid too easily and we¡¯ve already lost one.
Paige Dorsey –
This is very well made and sturdy. It fits my sink perfectly and adds protection and versatility to my sink. It allows me to keep things off the bottom of the sink and gives things a little chance dry.
The rubber tips fall out and have to be good about not letting them get to the drain, but other than that, they fit my sink perfectly and serve the purpose of protecting it. Happy with purchase, but could use the improvement on the rubber tips.
This product is great! It keeps the dishes off the sink well. My only complaint is the black rubber things in the outer corners come off easily. I’ve only lost one after realizing they are touchy. Other than that small issue excellent product and you def need it to go with the sink.
Combined with the exact Leafloat sink it was designed for, it keeps draining dishes off the bottom and out of dirty water running down the drain. Only complaint is that the rubber edge guards are made from too soft rubber/plastic so they too easily slip off the corners. Small but annoying.
Helen Deithloff –
This was the only grid I could find to fit perfectly in our new sink. Hole not 100% where it should be but close enough. Not sure how well it is made because we are now noticing some imperfections. I think my biggest issue is that I discovered one of the rubber pads laying in sink which means we’ll have to monitor this so they don’t come off and go down the disposal.
I bought a big Leafloat sink and obviously needed a stainless steel rack to protect my sink. It was an expensive add-on.