leafloat Topmount Kitchen Sink, Single Bowl, 16 Gauge T304 Stainless Steel, Satin Finish, with Strainer & Bottom Grid, cUPC listed
Key Features
16 Gauge Thickness The sink is real 16 Gauge, always 1.5mm thick, which is virtually indestructible and never chip or crack, thus saving a lot of maintenance or replacement cost. | A Quiet Sink Extra-thick rubber pads cover over 80% of sink base to absorb noise from dish washing and waste disposal. |
Gently rounded R10 corners are easy to clean, stand up to coffee, wine and grease,highly resistant to dirt and grime. |
R10 Corners Gently rounded R10 corners are easy to clean, stand up to coffee, wine and grease,highly resistant to dirt and grime. | Deep Bowl Self-trimming apron overlaps the cabinet face for easy installation. | T304 Stainless Steel Handcrafted from T304 stainless steel, the most durable material on the market that offers exceptional resistance to corrosion and rust. |
Size Table
Size | 25inch | 28inch | 30inch | 33inch |
Outter Dimention | (L)25 x (W)22 x (D)9 inches | (L)28 x (W)22 x (D)9 inches | (L)30 x (W)22 x (D)9 inches | (L)33 x (W)22 x (D)9 inches |
Inner Dimention | (L)22 x (W)17 x (D)9 inches | (L)25 x (W)17 x (D)9 inches | (L)27 x (W)17x (D)9 inches | (L)30x (W)17x (D)9 inches |
Package Includes
- 1 x Dish Drying Rack & Bamboo Cutting Board
- 1 x Strainer & Bottom Grid
- 1 x Custom Tower
- 1 x Cutout Template & Mounting Hardware
M. Johnson –
The sink looks great. We dont have issues with water pooling as some reviews mentioned. I think that is only an issue if the counter is not level. I used to own a shipping store and am impressed with the packaging job. My only complaint is that this is sold as a 33×22 sink that can drop into most existing installations. We had another 33×22 inch sink installed with a 20.75″ x 31.5″ hole in a stone counter top. The good news is this sink provides significantly more bowl room once installed. I’ve included pictures of the cutout template with a tape measure provided for this sink. There is no way this fits “most” existing installations. However, the hang up isn’t the sink itself. It is the mounting clips that stick out on all sides. In lieu of recutting the stone, I straightened(bent) all of the mounting clips to hug the bowl and attached wires and tensioners below to anchor the sink. With this modification, it fit into my existing hole. Without modification you need a32.25×21.25″ hole. I think the anchoring system could be re-imagined for the better on this sink to fit more installations, however this is a great sink and I would buy it again knowing I had to make modifications.
John Sound Dude –
We got this for our laundry / utility room. Fits nicely in a 24inch base cabinet. Construction of this sink is very robust and looks good also. I¡¯m thinking of getting another for the workshop.
Will-Review4U –
This sink was purchased to install a durable sink for washing / rinsing between our patio and mud room.The sink arrives in a well packaged box with heavy duty styrofoam to prevent damaging like dents or edge bents around the edges. The feature I live about this sink are the strainer basket and the included wire drying/ rinsing removable base that fits in the bottom of the sink.
Howard Rubenstein –
Have not yet installed, but it is solid and looks very well-made. I love the dimensions for my space. It is really efficient. Compared to the sink it’s replacing, I get two more inches of countertop and still have a bit more width on the inside of the bowl.
Shar –
This sink was so much nicer than I expected it to be. I’ve been looking for a deeper sink for my island prep area. This is beautiful. Absolutely love it!
Randall J. –
The fabrication of the sink allows for top or bottom mount.The thickness of the sink and sound deadening coating worked perfect for our application.
jeffrey dale sipes –
Very easy to install, looks great and great quality. I installed it in my teardrop trailer. Only thing that I wasn¡¯t expecting is the color is more smoked dark grey and not black as it¡¯s advertised but I actually like the color more as it is.
Guro Lawrence –
We were looking for a replacement sink for our laundry. Because it’s in the garage, I had limited space for the sink cabinet. I needed a sink that was small enough to fit into the cabinet base but big and deep enough to be useful. This Leafloat sink was the Goldilocks solution. On top of that, it is a really nicely made sink. From the thickness of the material to the quality of the welds, just nicely made. Especially noteworthy is the depth of the drain and the drain basket that is included. I had to do a little magic with the P-Trap because of the sink depth. But, otherwise, I am really happy with this product. Wife is happy too…Score!
Doug Bostock –
Beautiful sink, high quality, great value, it looks great in my camper van
Tavi P. –
Sturdy sink. Much better quality than local big box stores. The steel is thick and the extra items included make it a great value.