Topmount Workstation Kitchen Sink 33 Inch, Single Bowl, 16 Gauge T304 Stainless Steel, Satin Finish, with Strainer & Bottom Grid

(22 customer reviews)


  • Just the SINK you need – It has all the features you need, including real T304, 16 Gauge, R10 corners, Satin-finish, soundproofing, out-corner cut, etc, which satified all you need in use.
  • Topmount Installation – Drop-in topmount sink allows you to install it with any types of kitchen counter with a beautiful finish look. Mounting hardware kit and cutout template are provided.
  • DURABLE – Handcrafted with real T304 stainless steel in 16 Gauge ( always 1.5mm) thickness, making it indestructible, dent-resistant and long-lasting.
  • Free Accessories – Strainer, bottom grid and a LEAFLOAT branded tower are included.
  • Lifetime Warranty – All LEAFLOAT kitchen sinks are made in best-in-indudstry standard and provided lifetime warranty.

Get discount code now! >>>



Out of stock

SKU: LF-TR3322LD Categories: , ,
leafloat Topmount Kitchen Sink, Single Bowl, 16 Gauge T304 Stainless Steel, Satin Finish, with Strainer & Bottom Grid, cUPC listed

Topmount Workstation Sink

      • Workstation sink features an integrated ledge that provides a platform for custom accessories to slide across the sink. Custom roll-up dish drying rack and bamboo cutting board are included.
      • Drying Racks: Choose from a stainless steel drying rack that sits on the built-in workstation ledge, or a multi-functional roll-up rack that unrolls over the sink and allows you to drip-dry dishes without making a mess on your kitchen counter.
      • Cutting Boards: Custom-fit cutting boards in a range of sizes sit securely on the built-in workstation ledge, allowing you to make full use of the space over your sink.
Key Features

16 Gauge Thickness

The sink is real 16 Gauge, always 1.5mm thick, which is virtually indestructible and never chip or crack, thus saving a lot of maintenance or replacement cost.

A Quiet Sink

Extra-thick rubber pads cover over 80% of sink base to absorb noise from dish washing and waste disposal.

Satin Finish

Gently rounded R10 corners are easy to clean, stand up to coffee, wine and grease,highly resistant to dirt and grime.

R10 Corners

Gently rounded R10 corners are easy to clean, stand up to coffee, wine and grease,highly resistant to dirt and grime.

 Deep Bowl

Self-trimming apron overlaps the cabinet face for easy installation.

T304 Stainless Steel

Handcrafted from T304 stainless steel, the most durable material on the market that offers exceptional resistance to corrosion and rust.

Size Table

Size 25inch 28inch 30inch 33inch
Outter Dimention (L)25 x (W)22 x (D)9 inches (L)28 x (W)22 x (D)9 inches (L)30 x (W)22 x (D)9 inches (L)33 x (W)22 x (D)9 inches
Inner Dimention (L)22 x (W)17 x (D)9 inches (L)25 x (W)17 x (D)9 inches (L)27 x (W)17x (D)9 inches (L)30x (W)17x (D)9 inches

Package Includes

  • 1 x Dish Drying Rack & Bamboo Cutting Board
  • 1 x Strainer & Bottom Grid
  • 1 x Custom Tower
  • 1 x Cutout Template & Mounting Hardware

Most of the products are eligible for free shipping. We have multiple warehouses in Canada local market. Your package will be shipped out from the warehouse that is closest to your location, ensuring you will receive your package in the shortest time.
Handling time: 1-2 days maximum
Shipping time: 5-7 days


This item is eligible for 30 days return, exchange or refund, and life-time technical support.This item is eligible for 30 days return, exchange or refund, and life-time technical support.

22 reviews for Topmount Workstation Kitchen Sink 33 Inch, Single Bowl, 16 Gauge T304 Stainless Steel, Satin Finish, with Strainer & Bottom Grid

  1. George

    My wife and i have had an array of kitchen sinks through our early rentals and now homes – from huge cast iron farmhouse style to a stainless kitchen sink that was about as deep as a bathroom lavatory. We needed a new sink for our home, and until I looked on amazon had no clue that the workstation sink even existed. I am truly grateful that I did and that I now have the Sink installed.When I first opened the packaging i was impressed with the quality and professionalism that was put into the packaging…going so far as putting the sink itself in a large, fabric, drawstring bag.Installing the sink is easy but i warn your it is a beast. I had to adjust our cabinet door hinges slightly because the sink is so deep and so close to the leading edge of the counter top.From the collander to the cutting board to the drying rack, i honestly had no inkling just how dependent i could grow on these accessories in just a few weeks time. The colander is great for catching peels or cuttings from carrots to potatoes to pineapples and onions. Using the cutting board in conjunction with the colander, you can trim and chop and discard wast with a slide of your knife. No longer do you have to contend with a cutting board that has discards on it until i walk it to the trash. For this reason alone, the cutting board acts like it is twice it’s size.When it comes time for clean up the sink continues to be a star. My huge 13 qt le creuset Dutch oven is swallowed up by this sink. Finally no longer do I work so hard at getting it clean nor does the water spray back on me. If there is a negative to this sink – and I say this like a man looking at a huge diamond and trying to pick out a flaw…the sink could use a little more slope in the bottom. Some food just doesn’t want to head towards the drain, so typically i will use the sprayer to coax the food at the edges and in the corners down to the drain.If you are considering changing out the sink I highly recommend you look at the workstation models and Leafloat in particular.Edit: I still really like this sink one year later. The grate in the bottom of the sink is super functional but cleaning in it is a real pain. I scrub it once a week and it still looks awful. The fact that I spend extra time cleaning this sink but wouldn’t trade it speaks to the functionality. My latest method is to put the stopper in the drain and fill with hot water and bleach until the grate is covered. Soaking for 15 minutes to and hour followed by brushing with a kitchen brush has proved to be very effective.

  2. Carson

    Why did I wait so long to replace my old, small, dual-tub kitchen sink that I could not fit big pots or cookie sheets under! This new sink is great! Tons of space! I love the drying rack and usually leave it in place. The colander insert is fits well and is big to hold all my veggies at once for juicing. The cutting board is so handy and fits nicely.Nit-picky issues, NONE of which are worth dinging a 5-star rating in my opinion, but some you should be aware of:1. Yes, as others said, installation can be a bit challenging. Make sure you test fit and attempt to tighten clip bolts on all sides before applying any caulk/adhesive. Expect to need a screwdriver extension. I also had to cut some wood blocks so the clips would not angle badly back against the sink. With such, installation went fine. I’d suggest the manufacturer modify the clips (make them a bit longer to touch the sink as well so these blocks are not necessary.2. The cutting board is not the true color all the way through, so expect knife marks to appear very obviously.3. The sink bottom is very flat, and expect food particles to be hard to wash down. I have to remove the bottom grate and wipe down the bottom with a sponge. However, given the sink bottom grate (which is great!) holds all your dishes above the bottom and thus away from food and water, this isn’t an issue day to day.4. This sink is also quite big! So if you like to fill your sink with water and soak your dishes when washing, I suggest you get a dual-tub sink. I don’t — I wash directly from the hands-free faucet so I can save a lot of water. I’ll be buying a small tub to fit in the sink since my girlfriend prefers to soak dishes first.5. Do keep it clean and dry the edges after use. I have had a little surface rust appear.

Add a review